dry mounting
This is a 14 minute 55 second long video demonstration that shows step by step how to dry mount a print without a mount press using a regular home iron. it is very simple and can be done without much hassle.
video includes:
spoken in English
background music
everything needed is shown and listed.
This is a hands on demonstration.
This is useful for anyone looking to start mounting a print or piece of artwork permanently to a matte or mount board using dry mount tissue. Mounting a print really finishes it off and it protects the images integrity.
Trimming the edges....
This goes into trimming the print and assuring it is mounted correctly on the board.
*note* dont let your iron reach too much above 190F using the lowest possible setting, try on a scrap print first to make sure you dont scorch the print!
You don't need an expensive mounting heat press it can be done with a home iron.
The video can be viewed in two different ways using Windows Media Player 9
160 x 120 resolution at 15 frames per second, 8khz sound 38kbit/s steam for 56k modem at 4.4MB
320 x 240 resolution at 30 frames per second, 32 khz sound 340kbit/s stream for DSL/Cable/High Speed at 37.4mb